The Tapped Full Base Stud Welding Arc Stud is a plain shank stud for application with arc stud welding equipment. This type of stud welded fastener is usually flux-loaded on the weld end for studwelding applications. Available in low carbon steel, stainless steel and Aluminum, other special materials and grades are available. The tapped style is characterized by a stud body which is not externally threaded, and internal threading provided inside the weld stud body. Studwelding of the weld stud burns off a portion of the base so that the pre-weld, post-weld length dimension should be considered. All orders for arc weld studs from Stud Welding Products include ceramic studwelding ferrules properly sized for the weld stud ordered.
| D |
Min. L |
TD |
TL* |
Max FD |
Max FH |
1/4 |
9/16 |
8-32 |
1/4 |
.359 |
.109 |
5/16 |
21/32 |
10-24 |
9/32 |
.437 |
.109 |
3/8 |
13/16 |
1/4-20 |
3/8 |
.500 |
.125 |
7/16 |
29/32 |
5/16-18 |
15/32 |
.578 |
.140 |
1/2 |
1-1/32 |
3/8-16 |
9/16 |
.625 |
.156 |
5/8 |
1-9/32 |
3/8-16 |
9/16 |
.625 |
.156 |
3/4 |
1-3/8 |
1/2-13 |
3/4 |
.937 |
.250 |
7/8 |
1-5/8 |
5/8-11 |
15/16 |
1.093 |
.312 |
*Maximum standard tap depth equals 1-1/2 times tap diameter.
Taps: Standard tap is UNC-2B, other taps are available.
Material: Low Carbon Steel and Stainless Steel
Mechanical Properties: Tensile (60,000) psi (min.) Yeild (50,000) psi (min.) Elongation 20% (in 2 inches)
Plating: Plating is not standard. Copper, nickel, and zine available upon customer request
View/Print Spec Sheet
|
